Procedures for Dealing with Electrical Equipment in Wet Conditions

Handling electrical equipment when exposed to water

1
Do not rush to plug in and turn on the device

If you know for sure that electrical equipment is damp, it is crucial to refrain from plugging it in and turning it on. Doing so can lead to short circuits in the household electrical system or result in blowing a fuse inside the machine, resulting in damage to the internal components.

For more complex devices, such as TVs, it may be necessary to lift, remove, and dry them, depending on the duration of water immersion.

Do not rush to plug in and turn on the device

2
Clean, dehumidify and dry the device

If the electrical equipment is exposed to clean water, it should be placed in a drying cabinet to allow it to dry. If the water is dirty, it is essential to wash it first to remove any residual mud. Even after drying, moisture absorption can occur if there is remaining dirt, thereby damaging the device.

If an air conditioning or dehumidifier is available, it is advisable to close the door, turn on the air conditioner, or use the dehumidifier to dry the machine before using it again.

After drying, it is recommended to leave the equipment in a dry place for at least 24 hours to prevent condensation before reinstallation.

Cleaning, dehumidifying, drying for equipment

If a dryer is not available, an alternative option can be using a dryer to dry the outside of the equipment. It is important to note not to use a hot hair dryer as it can cause damage to the internal components of the device.

While it might be possible for a person with technical knowledge to remove the appliance cover for drying, it is not recommended by the manufacturer. In case of electrical equipment getting wet, it is best to bring it to an electrical engineering center for a thorough solution.

Clean the TV screen

3
Notes to avoid damage to the device

Attempting to dry and operate electronic devices again after exposure to water can result in a short circuit or, worse, an electric shock to the user. Numerous cases have shown users being injured or facing life-threatening situations due to the presence of moisture in the electronic components of the device.

Call a technician to check

The extent of water damage to the device depends on the specific part that was soaked and the duration of immersion. Even if the equipment appears dry, it is highly likely that internal components have been damaged and require replacement for safety purposes.

In the event of a flooded room, it is important to prevent household appliances from coming into contact with water first. Wait until the water recedes before disconnecting them from the power source. It is advised to avoid performing these tasks while standing in the water. It is recommended to have a technician or qualified individual thoroughly inspect the equipment.

When electrical equipment gets exposed to water, following these guidelines can assist in minimizing damage and potential risks. Please feel free to share any additional tips or advice in the comments section below!

The post https://meo.tips/how-to/procedures-for-dealing-with-electrical-equipment-in-wet-conditions/ appeared first on Meo.tips.

View more from Meo.tips:

Thousands of Photos Captured with Amazing View of Quang Binh Homestay
“How to Pack a Suitcase With Clothes to Avoid Paying Extra Baggage Fees”
Explore the Top 10 Most Picturesque Homestays in Vung Tau
“How to Clean Burnt Pots Easily: 8 Easy Tips”
Top-Rated Condom Brands of Today
10 Easy Ways to Amaze Yourself in the Kitchen
Top Tips for Removing the Odor of Cooked Meats from the Home
Changing Your Driving License Online with the General Department of Roads in 5 Minutes or Less
How to Identify Authentic and Fake Medical Masks
What Makes Fever Jump Arena Saigon So Appealing to Gen Z?
Preserving Cilantro and Coriander for One Month
How to Make a Foot Bath to Protect Your Health: Benefits of Soaking Your Feet
Explore These 5 ASMR Cooking Channels for an Ultra Relaxing Time
Tips for Selecting Sweet, Unsprayed Star Gourds
Exploring 10 Beautiful Quy Nhon Homestays with Unique Architectural Styles
Discover the Unexpected Benefits of Combining Ginger and Toothpaste
Five Simple Strategies for Perfect Grilling
“4 Steps to Easily Get Rid of Mouse Glue on Floor and Clothing”
Benefits of Installing an Exhaust Fan for Air-Conditioned Rooms
90% of Vietnamese Housewives Guessing Incorrectly on Whether to Use Hot or Cold Water to Cook Rice

Comments

Popular posts from this blog

Top 10 homestay in Da Nang with beautiful sea view, reasonable price and close to the center

Top 10 most beautiful homestay places in Vung Tau, you must definitely visit